English
 |
| Quantity: | |
|---|---|
Features: often cooperate with T-Nuts, used for fastening profile accessories
The head structure of the Half Round Head Phillips Bolts is one of its characteristics. The cross-shaped design makes it easier to rotate the bolt, while the semi-circular design increases the tensile strength of the bolt. This head construction also makes the bolt easier to install and remove, as it can be easily rotated with a wrench or spanner.
 | The industrial profile frame is generally connected internally, and special half-round head bolts are used, and the process installation holes need to be tapped and punched at the profile connection before installation. To prevent loosening. |
 | Half round head bolts are generally used for right Angle connections. Machining is done on the two connected profiles. The top of one needs to be tapped, and the other needs to be pierced. The right-angle connection of this aluminum profile connection belongs to the built-in, because it can not be seen outside, and the advantage is that it is well positioned when installed, and in the frame such as the protective cover, acrylic, plexiglass, sheet metal, etc., can be embedded in the slot. This connection method is economical, practical and cost-effective. |
Features: often cooperate with T-Nuts, used for fastening profile accessories
The head structure of the Half Round Head Phillips Bolts is one of its characteristics. The cross-shaped design makes it easier to rotate the bolt, while the semi-circular design increases the tensile strength of the bolt. This head construction also makes the bolt easier to install and remove, as it can be easily rotated with a wrench or spanner.
| The industrial profile frame is generally connected internally, and special half-round head bolts are used, and the process installation holes need to be tapped and punched at the profile connection before installation. To prevent loosening. |
| Half round head bolts are generally used for right Angle connections. Machining is done on the two connected profiles. The top of one needs to be tapped, and the other needs to be pierced. The right-angle connection of this aluminum profile connection belongs to the built-in, because it can not be seen outside, and the advantage is that it is well positioned when installed, and in the frame such as the protective cover, acrylic, plexiglass, sheet metal, etc., can be embedded in the slot. This connection method is economical, practical and cost-effective. |
