English
Views: 0 Author: Site Editor Publish Time: 2024-01-15 Origin: Site
Industrial aluminum profile cable racks have a wide range of applications. Optical cables, wires, and cables need to be laid out where they exist, such as the construction of base stations in computer rooms. As an indispensable auxiliary equipment for communication equipment in modern communication equipment rooms, aluminum alloy cable racks not only have the function of supporting the weight of all cables, providing wiring and providing top fixed fulcrums for equipment, but also have the function of beautifying the equipment room.
In addition to telecommunications equipment rooms, where can it be applied?
In the 21st century, industrialization is developing rapidly. No matter what industry has its own equipment operation base, where there is equipment, the auxiliary role of the aluminum profile cable rack is indispensable. Its function is specifically used to route equipment lines. The following is its role Factory floor applications.
The picture is used in the production workshop to facilitate cabinet wiring. Its structure adopts two installation forms, cabinet top installation and ground support installation. It is built with 4040 aluminum profiles and is divided into double-layer structure wiring. You can see from the picture You can clearly see the wiring situation, and customers can flexibly customize it according to actual use. No drilling or special tools are required, which reduces workload and construction time.
Figure 2 uses ceiling installation. The bottom is convenient for placing operating equipment. Installing various equipment on the automated assembly line requires wiring. Routing from the top can save floor space and make the scene beautiful. The profile specifications used are also 4040 profiles. Accessories used in the ceiling It does not require profile accessories to make it strong. It has special accessories, including: three-hole connectors, four-hole direct connection plates, U-shaped brackets, aluminum boom top fixings, wire boom top fixings, Threaded boom bracket.
The aluminum alloy cable rack is designed as a fully open bare rack according to the requirements of the Ministry of Information Industry, and can be used for routing cables on the ceiling, along the wall, and on vertical racks. It has good load-bearing effect, is beautiful and convenient, and is convenient for future maintenance, inspection and repair. The installation methods are generally divided into the following three types.
1.Ceiling installation
| Ceiling installation At present, the integrated cabling in data centers is popular for upward routing. The upper routing rack facilitates maintenance and heat dissipation, is conducive to air conditioning and ventilation, and can also play a role in preventing rats and waterproofing. When designing, full consideration should be given to the height of the installation space, as well as lights, fire protection, air ducts, beams and columns, etc. It is recommended to install a set of hangers every 1.5 meters on the upper cabling frame. The specific span also needs to be calculated based on the actual load. If there is a local high load, the hanger density needs to be increased. When installing double-layer wiring racks, the vertical spacing between strong and weak current wiring racks should be ≥300mm. Due to the limitation of the clear height of the top, the strong and weak cable racks can be installed on the same plane with a horizontal interval of ≥150mm. |
2.Cabinet top installation
 | Cabinet top installation In the actual installation of the data center, the hanger cannot be installed due to reasons such as the floor is too high, the top structure is special, or the owner does not want to damage the ceiling. In this case, you can choose to install the cable rack on the top of the cabinet. The top bracket and the cabinet are fixed with bolts. There are no holes on the top of the cabinet and need to be drilled. The installation height of the bracket is arbitrary. The bottom wiring rack is generally 150mm~200mm higher than the top of the cabinet. The actual height needs to comprehensively consider the overall situation of the computer room, and give priority to ensuring the wiring space above the wiring rack. It should be noted that this kind of installation requires all cabinets to be in place, and the distance between cabinets should not be too large, which will cause the wiring rack to collapse due to excessive span, and the cabinets will be inconvenient to adjust after installation. |
3.Ground support installation
 | Ground support installation Ground support installation is to install the wiring on the ground and is often used for outdoor base stations. There is no condition to suspend the ceiling in the computer room. When the equipment is not in place, the cable rack can fix the wall end and the ground. If there is an electrostatic floor in the computer room, it is necessary to make holes in the electrostatic floor so that the columns can be rooted and fixed to the ground. |
