English
 |
| Quantity: | |
|---|---|
Aluminum Extruded Bracket is a type of profile made by extruding aluminum rods.
The commonly used material for extrusion Angle aluminum is 6063-T5 aluminum alloy, which has excellent corrosion resistance, weldability and machinability, and also has excellent mechanical properties.
Aluminum Extruded Bracket usually uses angles of 90 degrees, 45 degrees, 135 degrees. Generally, the aluminum usage rate of 90 degree Angle processed into workpiece is higher, and the use of these boxy frames such as equipment hood and workbench is more convenient. Machining workpieces like 45 degrees and 135 degrees are used more on the conveyor line.
Punching connection is a common connection method used by aluminum profile manufacturers, which needs to be drilled in the corresponding position of the aluminum extrusion bracket in advance, and then connected with bolts and nuts. For connecting bolts and nuts, use hexagon bolts + T-nuts, half-round head bolts + T-nuts. The aluminum extrusion bracket connected in this way is neat and beautiful, easy to maintain, easy to disassemble, and the integrity of the aluminum profile is protected as much as possible, and the recycling cost is low.
Different Type for 90-degree Extrusion Bracket
 |  |  |
Aluminum Extruded Bracket is a type of profile made by extruding aluminum rods.
The commonly used material for extrusion Angle aluminum is 6063-T5 aluminum alloy, which has excellent corrosion resistance, weldability and machinability, and also has excellent mechanical properties.
Aluminum Extruded Bracket usually uses angles of 90 degrees, 45 degrees, 135 degrees. Generally, the aluminum usage rate of 90 degree Angle processed into workpiece is higher, and the use of these boxy frames such as equipment hood and workbench is more convenient. Machining workpieces like 45 degrees and 135 degrees are used more on the conveyor line.
Punching connection is a common connection method used by aluminum profile manufacturers, which needs to be drilled in the corresponding position of the aluminum extrusion bracket in advance, and then connected with bolts and nuts. For connecting bolts and nuts, use hexagon bolts + T-nuts, half-round head bolts + T-nuts. The aluminum extrusion bracket connected in this way is neat and beautiful, easy to maintain, easy to disassemble, and the integrity of the aluminum profile is protected as much as possible, and the recycling cost is low.
Different Type for 90-degree Extrusion Bracket
| | |
